Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
I want to go faster.
User avatar
By sgtSnow
#146287
I saw a great deal on a 12v 2-speed quad and immediately snatched it up. Once my daughter hopped on it, it seemed extremely slow. Turns out it has a top speed of 2mphs. I'm new to power wheels but this seems odd to me. At any rate, I want to make it faster.

This is the quad in question.
https://bestchoiceproducts.com/collecti ... ghts-music

I've been doing some research but unsure of the best route to go. Here is what I know.

The only info I can find on the motor comes from the item description. It's 15 watts. That seems extremely low to me. Some forums have put other 550 motors around the 200 watt area. I pulled one motor out but cant find any detailed spec sheets on the part number. They are 550 12v 9000rpm motor. 10t pinion. The motors are wired in parallel.

I was initially going to go the 18v route but I have some hesitation for two reasons:
1. I found a circuit board with a 15A 14v relay in it. Based on the fact forums say I should throw a 30A inline fuse in, Im guessing it will get fried immediately.
2. If the motors are truly crap at 15 watts as I suspect, wouldn't it just be better to replace the motors with either the hpi or traxxas 550 motor sets?

Got harbor freight 13x5 tires on rim, sawed off th[…]

New guy

Hello everyone! I found so much great info here I […]

Dune racer batman 24 volt help

Thanks Wesley -- good point that not everyone want[…]

Thanks

HobbyMasters Udemy Course