Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
Need new batteries? Going from 12V to 18V or 6V to 12V? Wiring Questions?
#147165
I am trying to upgrade my daughter's car from a 6 volt to 12 volt. It has an RC module in the circuit so it can be controlled by remote. I would like to keep that feature however when I replaced the battery, the car just pushes forward at Max speed and does not take any RC input. I have to turn the power off to get it to stop.

It has an MP3 auxillary port and all sorts of lights so I am not sure which wires are for what or what I should do.

Pictures are of my current setup in there.

Any thoughts on what I can do?

Image
Last edited by OneAdam12 on Sun Sep 10, 2017 10:12 am, edited 1 time in total.
HELLO!

THANK YOU FOR THE ADD! LOOKING TO BE ABLE TO ASK A[…]

Unibody Jeep Front End Sag

I did this on my Hurricane. I used a fairly long M[…]

I will have to look at the shifter when I get off […]

Upgrade BMW i8 Concept

If the 6v bat is stock it may have a built in fuse[…]

HobbyMasters Udemy Course