Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
Need new batteries? Going from 12V to 18V or 6V to 12V? Wiring Questions?
#149437
Need some advice. Picked up dodge dually and bypassed the little circuit board. However it barely moved. In reverse and low I have 12 volts to the motor. In high I have 4.2 to one motor and 4.8 to the other. I am not sure what else to be checking for that could cause it to bog down so bad. Pick rear end up and push petal and spins freely and fast. Could I have a bad motor or something similar? Any advice would be awesome


User avatar
By wired
#149439
In high you should have 12v to each motor (parallel). In low or reverse you should have 12v supplied to both motors(series). Double check wiring. Sounds like you are getting the opposite results.
Volts/ current regulator

Many thanks, I’m rubbish with electrics but […]

H4805 Linkage Help Part B7659-9419D

Hello, Looks like the steering linkage part numbe[…]

Electric Scooters

It's an old post but if still, anyone wants to kno[…]

rc power wheels conversion question

SOoOO im a complete noob at this. No real backrou[…]

HobbyMasters Udemy Course