[(MOPHEAD)]

This is my first time modifying a power wheel and I thought that I would share.
My son got a 6v Peg Perego mini loader this past Christmas from his granddad and after having his 12v Dodge, the mini loader just isn't enough. I decided to order the harness from the 12v loader and add an additional gear box to the mini making both rear wheels driven by separate gearboxes.
So far, I have ordered a factory gearbox, a new rear axle (that I will be modifying), a new square hub and I had to order a new rear hub cap after marking the old one up while taking it apart. I will try to keep up with taking pictures and will keep anyone who may be interested posted.
Thanks for checking my build.
Posted below are a few before pics and of coarse, one of the dodge he is currently driving and loving.

[(MOPHEAD)]

Here is the extra inner hub after removing the free sitting wheel spacer from the none drive wheel and pictures of the other parts I just ordered off eBay. I plan on picking up a hole saw kit tomorrow and am going to cut a opening in the opposing side where the motor mounts to match the existing hole for the new gear box.

[CJB]

by 'Dual 12V' you mean dual motors at 12v and not dual 12v batteries right?

[(MOPHEAD)]

I'm having it run with dual motors and one battery. I actually finished and need to post the pictures of it. Ended up looking oem.

[(MOPHEAD)]

This is after I cut the new hole and mounted the extra gearbox.

[Jhbluhm]

How did this work out? Im in the proccess of doing it now but bought cheap generic gearboxes and concered about them supporting the wieght