Page 2 of 2

Re: CJB Performance Electronics News & Updates

Posted: Thu Jul 27, 2017 5:18 pm
by dsmproject
I put my order in! Not missing this again. I now have more of these kits than I have power wheels... I'm excited!

Thanks so much CJB!

Re: CJB Performance Electronics News & Updates

Posted: Thu Jul 27, 2017 9:58 pm
by CJB
I don't know why it charged you so much for shipping. I have to look into that. I'll throw a few relays in to make up the difference. Thanks.

Re: CJB Performance Electronics News & Updates

Posted: Thu Jul 27, 2017 11:15 pm
by wired
I have much respect for you CJB. You are one class act. You build quality products, offer them at ridiculously low prices and still make time to support the forum. I know you don't do it for profit (obviously) and your a top notch guy. Thanks for all you do.

Re: CJB Performance Electronics News & Updates

Posted: Fri Jul 28, 2017 7:02 am
by dsmproject
CJB - That is definitely not required! I am just happy that you take the time, as wired said above, to help this community. It is really not a lot for shipping, I am happy to pay that with nothing more in return.

Re: CJB Performance Electronics News & Updates

Posted: Mon Jul 31, 2017 1:48 pm
by Kevinob
Awesome news. Loved both the product and service from my previous purchases... and will order more for an upcoming project.

Re: CJB Performance Electronics News & Updates

Posted: Tue Mar 27, 2018 10:20 am
by notasausage
Any chance that you'll have more stock of the Turbo Timer and the 18V Circuit Board available any time soon? I just picked up a used Jeep Hurricane for my son and the battery is nearly shot, so I wanted to do an 18V upgrade while I was at it...

Re: CJB Performance Electronics News & Updates

Posted: Tue Mar 27, 2018 11:10 am
by CJB
I suppose I should post news and updates in my news and updates thread huh...

My web store is in 'vacation mode' as I've been busier than crap lately and year end brought some surprises and the glaring observation that I have no business trying to start a business. I have to figure out how to refile my company under a different classification and then I will be open again. I just have to find time to do so.

Re: CJB Performance Electronics News & Updates

Posted: Tue Mar 27, 2018 5:34 pm
by notasausage
I figured as much. Let me know if you find any time, I'd love to add a TT4 at the very least!

Re: CJB Performance Electronics News & Updates

Posted: Wed Oct 24, 2018 9:16 am
by CJB
Knocking 15% off the Turbo Timer 4 and 18V Interface board until they are out of stock. And when they're gone, they're gone.

You can find them here:
https://www.freewebstore.org/cjbperformance

Thanks,
CJB

Re: CJB Performance Electronics News & Updates

Posted: Wed Oct 24, 2018 5:37 pm
by thisdave
Will this work with 24 volts ? 2 * 12 volt batteries ?

thanks.

Re: CJB Performance Electronics News & Updates

Posted: Thu Oct 25, 2018 5:18 am
by CJB
As long as the turbo timer is only supplied 12v, you can control a range of voltages with it. Likewise with the 18V interface board, you could go 12+12 in place of 12+6.

Re: CJB Performance Electronics News & Updates

Posted: Thu Oct 25, 2018 5:09 pm
by thisdave
Thanks.
Question: so you can wire it up so it turns off all the accessories after 5 minutes of non use. Does this capability still draw power once it turns everything off after 5 minutes?

I wired up a wireless kill switch, that works great, except if I forget to disconnect it after use then it slow drains the battery, wondering if I could wire it as an accessory on your unit, then it would quit draining the battery etc.

Re: CJB Performance Electronics News & Updates

Posted: Thu Oct 25, 2018 7:44 pm
by CJB
It will continue to draw a few milliamps as it's always waiting for the pedal to get pushed. Probably less than your remote switch though.

Re: CJB Performance Electronics News & Updates

Posted: Sat Oct 27, 2018 1:46 pm
by thisdave
Thanks
another question.
Would your 18V INTERFACE BOARD work with 24 v ... could your charge 2 12volt batteries from the single 12 volt charging port ? and I guess the 6 volt charging port would just be redundant.
OR
would I be able to mark the 6v as 12 volt and just connect the second 12 volt battery to the 6 volt port, and combine the charging ports for one 12 volt battery charger ?

so 2 12 volt input batteries and the output would be 24 volts ?

Thanks.

Re: CJB Performance Electronics News & Updates

Posted: Sun Oct 28, 2018 6:50 am
by CJB
Use the 6v ports as 12v.

Re: CJB Performance Electronics News & Updates

Posted: Sun Oct 28, 2018 7:30 pm
by thisdave
thanks

Re: CJB Performance Electronics News & Updates

Posted: Mon Oct 29, 2018 5:44 am
by CJB
I missed the part about combining the ports for 1 12v charger. You'll still have to use the other charging ports. Its a good idea to charge them separate anyway.

Alternatively you could use a single 24v charger as -12 and +6 are already wired together on the board. (this is why you cant use a single 12v charger for both batteries at the same time.)

Re: CJB Performance Electronics News & Updates

Posted: Mon Oct 29, 2018 1:55 pm
by thisdave
would I be able to attach a single 24 volt charger to your board to charge both batteries?
which terminals would I attach a single 24 volt charger?
if not I could attach 2 12 volt chargers to your board an it would charge both batteries etc. ?

Just ordered them
thanks

Re: CJB Performance Electronics News & Updates

Posted: Mon Oct 29, 2018 2:09 pm
by CJB
A single 24v charger to +12 and -6 will charge both batteries in series like a single 24v one.

Re: CJB Performance Electronics News & Updates

Posted: Mon Oct 29, 2018 11:08 pm
by thisdave
Thanks
any recommendations on 24 volt chargers by any chance ? :)

Re: CJB Performance Electronics News & Updates

Posted: Tue Oct 30, 2018 6:03 am
by CJB
Never had one. 2 12v chargers would work also. One to +12 and -12 and the other to +6 and -6 which is really also 12. That's what I would do. Especially since I don't have a 24v one.

Re: CJB Performance Electronics News & Updates

Posted: Fri Nov 09, 2018 9:15 am
by toycrusher
thisdave wrote: Mon Oct 29, 2018 11:08 pm Thanks
any recommendations on 24 volt chargers by any chance ? :)
Schumacher makes one specific for power wheels. It's a great charger, about $50