M.L. Toys
M.L. Toys
HobbyMasters M.L. Toys
This section can be used for members to link all their projects, diagrams, favorties, etc to one place. Please keep titles specific and to the point while including your user name and type of content.
User avatar
As discussed in a different thread, I'm starting this thread and linking it in my signature. This thread will contain all of the wiring diagrams/circuit schematics I've authored. Perhaps more for my reference than yours, but feel free to check it all out and use one or modify it to suit your needs.

This thread is FOR REFERENCE ONLY. DO NOT POST COMMENTS or it will be all cluttered. :!:

IF YOU HAVE A QUESTION, PM me or start a new thread referencing the diagram in question. If this gets filled up with conversation,. I won't be able to find anything. :geek:
Last edited by CJB on Tue Apr 02, 2013 7:48 am, edited 1 time in total.

User avatar
Just what I happen to have available here at the moment:
Escalade EXT.png
Wiring diagram for my Escalade EXT
Actually, this doesn't look quite right, but it's close.

Escalade EXT.png (23.55 KiB) Viewed 6282 times
mobile kill.png
Quick diagram I made someone for a mobile kill switch. (Yes, I know the connector doesn't quite look right)
mobile kill.png (14.71 KiB) Viewed 6282 times
CJB Turbo Timer™ Rev. E
CJB TURBO TIMER_E.png (16.65 KiB) Viewed 6282 times
cjb nos wiring diagram.png
Diagram on how to connect the Turbo Timer
(Note: For green and orange wire, do not rely on the color. I have mixed that up in the past. The one on the right, nearest 'OUT' is always the ENGAGED wire)

cjb nos wiring diagram.png (63.8 KiB) Viewed 6282 times
Last edited by CJB on Mon Sep 10, 2012 5:44 am, edited 3 times in total.
User avatar
few more
This was a diagram I sent to a guy I made this harness for. It's designed to be permanently mounted to the batteries and moved from vehicle to vehicle. Includes Remote Kill, and is turbo ready.
18V HARNESS.png (14.58 KiB) Viewed 6279 times
Quick & dirty diagram of how to hook up a Sho-Me 11.1005SF Controller
SHOME.png (15.92 KiB) Viewed 6279 times
Diagram for my Polaris 700
polaris.png (32.27 KiB) Viewed 6279 times
Diagram for the Tinkerbell Ninja
NINJA.png (17.81 KiB) Viewed 6279 times
Kstorm Rev_F.png
Diagram made for kstorm using charge port, volt meter, Turbo Timer™, and some other items.
Kstorm Rev_F.png (62.63 KiB) Viewed 6279 times
User avatar
Drawing for Sheridan-
Using the Turbo Timer 3.0 to switch 2 12v batteries from parallel to series via DPDT relay

EDIT: preferred set-up would include an accessory 12v battery. I personally like to use my drive batteries for drive only and power ALL other crap (lights, horns, relay coils, etc) off a separate battery. This simplifies (for me) wiring, troubleshooting and charging.
sheridan.png (38.18 KiB) Viewed 4213 times
Last edited by CJB on Mon Apr 28, 2014 10:21 am, edited 1 time in total.

These links work very well. I'm also looking for t[…]

It's the information I'm looking for as well.

Bottom Line Up Front - Michael from ML Toys is rud[…]

Bye Bye push nuts

Hey, this works like a charm. I did it last night[…]

HobbyMasters Udemy Course