Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
Adding R/C to your Powerwheels vehicles? Using R/C parts on your Powerwheels?
User avatar
By RCpower2017
#144987
Well today was my daughters birthday and I built her a custom princess Sofia RC power wheels. It worked well, not great. The car drove well, just not the steering. I used a 15kg/cm servo and thought it was enough to steer it around. well it really struggles. so now back to the drawing board. I don't want to go with a linear actuator cause its a lot of rebuilding and would prefer a simple servo swap. anyone have a good recommendation for a strong servo that isn't over $50

Link to the video of the car in action


Servo used-Hobbypark HDR315M 15kg Digital High Torque Robot Servo Motor 180 Degree Metal Gear With U Mouting Case
Attachments
kids in ari's car.jpg
Unibody Jeep Front End Sag

I did this on my Hurricane. I used a fairly long M[…]

I will have to look at the shifter when I get off […]

Upgrade BMW i8 Concept

If the 6v bat is stock it may have a built in fuse[…]

Will do. You're next in line.

HobbyMasters Udemy Course