Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
Have you added running lights? Headlamps? Perhaps some spinners?
By pjandrade
#61712
Working on a 2010 mustang. Was able to do the lights easily. However I am looking to install backup lights and break lights (without adding break pedal). Can someone guide me on the right direction?

Thanks in advance
User avatar
By Houdeani01
#62046
You could use a relay on the gas pedal that you set to turn on the brake lights when the gas pedal is not pressed. Similarly you could put a relay on the shifter that turns on reverse lights when it is switched to reverse. This would be one of many ways to accomplish this. Let me know if you need more detail than that.
By FASTRAKR
#62166
I am actually looking at doing the same thing right now as well as adding a gear indicator on the dash so I can tell from behind what gear she is in before she hits the pedal.
User avatar
By D3v1L
#148603
Houdeani01 wrote:You could use a relay on the gas pedal that you set to turn on the brake lights when the gas pedal is not pressed. Similarly you could put a relay on the shifter that turns on reverse lights when it is switched to reverse. This would be one of many ways to accomplish this. Let me know if you need more detail than that.


Diagram please
User avatar
By D3v1L
#148604
Houdeani01 wrote:You could use a relay on the gas pedal that you set to turn on the brake lights when the gas pedal is not pressed. Similarly you could put a relay on the shifter that turns on reverse lights when it is switched to reverse. This would be one of many ways to accomplish this. Let me know if you need more detail than that.


Diagram please

Forgot to add a pic of the wheel attached to the m[…]

Chain Drive Dune Racer Prep

i.d. on the gear is 1 3/8" so it looks like t[…]

Ok, I give up! anybody got advice on resizing imag[…]

I dont get on this forum much any longer but I jus[…]

HobbyMasters Udemy Course