- Wed Aug 03, 2016 1:42 pm #141886
absentspace wrote:This project looks fantastic! I am working on something similar and was wondering what type of paint you used? I ended up going with Rustoleum universal primer + paint, but I'm not incredibly happy with the results. Even though I washed the surfaces to be painted quite thoroughly and allowed to dry, I have chipped some of the paint off with minimal contact. I didn't sand the plastic, or use a separate primer, which in retrospect I regret. Were I to do this again I would probably use a gravity gun with an air compressor. Just curious to know what your process was.. My parents own a body shop that I've worked in since I was 17. I wet sanded mine with 400 used bulldog " adhesion promoter" and primed . Wet sanded again n sprayed my sealer with flex agent and applied color and the matte clear.
It's normal to do that when raised in the air. If […]
Sweet ride! That sand was packed compared to the d[…]
I would like to upgrade the motor to 12v but I am […]
Interesting. That looks like an older (red painted[…]