Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
I have something you MIGHT want. Do you want to buy?
User avatar
By Tythejeepman
#145348
Thinking of selling these, you would have to trim the excess plastic of your pedal to make it look clean, attachment would be by medium length rivets I will make sure the holes where the rivets go are drilled down so the rivet heads don't snag a foot well pressing the the throttle I will file the edges as smooth as possible with a metal file for safety I am thinking around ten dollars plus shipping per pedal or if you want to meet I can do that in central michigan! Here's the one I did for my Bigfoot let me know if you would like one! These are made out of the nice thick polished aluminum diamond plate so flimsyness wont be an issue its a little under a 1/4"'thick!
Attachments
image.jpeg
Last edited by Tythejeepman on Thu Apr 20, 2017 8:21 pm, edited 1 time in total.
User avatar
By Tythejeepman
#145353
Should be fine I'm filing all the edges with a metal file smooth plus I'm going to use a larger drillbill to let the head of the rivet set down in the hole deeper so that it don't chew up tenishoes or the little ones feet :)
Unibody Jeep Front End Sag

Ok First! I have read all the post I could find on[…]

Burning up Banebot 775 Motors

Not sure what to suggest here. Unless the (still […]

I came across this thing for free. It's awesome. N[…]

Since you haven't purchased it yet my suggestion i[…]

HobbyMasters Udemy Course