Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
Anything that doesn't fit somewhere else & general forum updates
#146677
Hi guys!

Amazing community you have here, I spent way too many hours reading over other peoples mods before I decided to finally get mine done.

I have a the Wrangler model, Ive already got 2x12v all wired in with 30A fuse, everything is good to go, I just need the upgrade motors.

This is the stock motor :

Image

16T

Image

From the stickied thread here: viewtopic.php?f=41&t=19903 I found a source for the engine and what I must assume is the right pinion to go with it.

I want to drop in 775, can I just get confirmation before I order that this is what i need?

Motor: http://eastcoastpowerup.com/Motors/775_Motor

Pinion: http://eastcoastpowerup.com/775_Motor_Pinion

Question: Can I drop in this 775 motor with a 22T pinion? Will it fit the current gearbox without changing anything else?
#146680
Looks like you have a stock 16t pinion. You will have to stay with the 16t 32pitch pinion to keep from binding the motor pinion with the 1st gear in the gearbox unless you are moving the motor mount point further away from the 1st gear.
#146681
Before changing motors, your first step really should be the ESC kit he offers. Any other mods just lead to carnage if you don't have the ESC Z in place

HI there Coopz. I'm from Italy so..forgive my engl[…]

Ford F150 Raptor tire upgrade

Sorry for the late response. So after the modifica[…]

Sounds like the switch. Pop it out and test with a[…]

The project is picking up pace. The 1" tubes […]

HobbyMasters Udemy Course