Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
Anything that doesn't fit somewhere else & general forum updates
User avatar
By Sebgaut01
#146901
Hello, I have a Peg Perego RZR 24v, I had a problem, it did not work, so I ordered a new pedal, a new board and the reverse switch. I changed everything, now it works, contrary when I push the pedal the truck goes in reverse. I try to connect the old board, same result. Then I reconnected the old reverse switch, same result. I was wondering if the polarity of the motor could be the problem, I have two new 350w engine that I had to install but it currently has both original engines.
I do not understand my problem, the wires on my pedal are well connected, red top, middle white and blue below, the contact switches are clean.

So I still have the engines to know if I can reverse polarity. I also replace my batteries with Enerwatt 12v14mah ..
So I need help !! thanks
User avatar
By Bigmac41288b
#146902
When you replaced the batteries did you get the polarity correct? If those are installed backwards it would switch everything in the system to work backwards.

Mike I haven't forgotten about you. I ......enter […]

Every once in a while somebody goes that new direc[…]

Yea if you use stock battery, that will happen. I […]

Ford F150 Raptor tire upgrade

I want to relay my experience attempting to upgrad[…]

HobbyMasters Udemy Course