Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
Anything that doesn't fit somewhere else & general forum updates
#147106
I have a stock 24v rzr with no upgrades except rubber tires. It was cutting out under load before so I swapped the thermal switch for a 40 amp fuse. Well now it is still cutting out under load but it is not blowing the fuse. It will cut out middle of a hill or something and start rolling backwards... then if it sits for 20-30 seconds it will start back. No noises or anything. It has the newer board and shifter with the pedal with the yellow slider for high and low. I recently put a complete overhaul kit on it, so every component is new. Does the board have some sort of heat protection built in or a current cut out or something?

Help please!
#147144
Does the new board still have those yellow things that I can't remember the name of? Lol, some help I am!
#147259
Sorry, haven't been on here much. I believe you have a pair of thermo-switches in a little black box, unplug them and install fuses in their place. Might help
Can old motors be repaired??

My testing is with both real wheels off the ground[…]

6V battery replacement

Q: I want to use a 6v sla battery, can I cut the c[…]

Have the same problem with my grandsons truck. No […]

Ford F150 Raptor tire upgrade

Not quite following from the description and pics.[…]

HobbyMasters Udemy Course