By 850-r - Mon Sep 04, 2017 8:03 pm
- Mon Sep 04, 2017 8:03 pm #147106
I have a stock 24v rzr with no upgrades except rubber tires. It was cutting out under load before so I swapped the thermal switch for a 40 amp fuse. Well now it is still cutting out under load but it is not blowing the fuse. It will cut out middle of a hill or something and start rolling backwards... then if it sits for 20-30 seconds it will start back. No noises or anything. It has the newer board and shifter with the pedal with the yellow slider for high and low. I recently put a complete overhaul kit on it, so every component is new. Does the board have some sort of heat protection built in or a current cut out or something?