Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
Anything that doesn't fit somewhere else & general forum updates
User avatar
By bostonkiter
#147247
24v ESC works great (for now) wired through the stock shift relay.

Where do I add resistance to make braking happen? Right now it rolls forever to a stop.

THANKS IN ADVANCE!
User avatar
By Hackish
#147385
On a DC motor, it is quite easy to add resistive braking. For a brushless, it's generally a function of the ESC. It has it or it doesn't. Most of the ESCs I've seen use a PWM drive from an RC servo control system so those with speed control can also use a PWM ramp-down to control braking. I didn't go forward with BLDC and ESC for the toy I have because of cost and the amount of time I have available. Hope that helps.

The project is picking up pace. The 1" tubes […]

Hey guys, it's been a while. Things got really bus[…]

I got a used Dumar Mega Tredz Yamaha Raptor 660. I[…]

PW Corvette help

So I bought a Black PW Corvette from craigslist, t[…]

HobbyMasters Udemy Course