Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
Anything that doesn't fit somewhere else & general forum updates
User avatar
By Shambosley
#147342
I need help troubleshooting my sons 24v 1000 w full esc dune racer. Today he drove it around for about 45 minutes and the resetable fuse breaker flipped. Upon ressetting it, it now goes full speed by its self, without the pedal being depressed as soon as I reset it. I'm sure someone has had this problem, any ideas where the cuplrit is? Thanks in advance
User avatar
By Shambosley
#147348
Okay, so I found that the motor connectors(yellow and blue) coming from the ESC were melted. I replaced the connector and the motors still spin wide open as soon as I connect the batteries. Fried ESC?
User avatar
By Hammer-fm
#147350
Bummer -- 99% probability that the ESC is fried. The FET drivers usually fail "shorted", which will run the motor at full speed.

HI there Coopz. I'm from Italy so..forgive my engl[…]

Ford F150 Raptor tire upgrade

Sorry for the late response. So after the modifica[…]

Sounds like the switch. Pop it out and test with a[…]

The project is picking up pace. The 1" tubes […]

HobbyMasters Udemy Course