Page 1 of 1

Replacement Relays for ESC 24v - help *UPDATED LINK*

PostPosted:Sun May 13, 2018 9:35 pm
by Sagacious715
So, I've got the original 24v 500watt ESC from east coast power up and I'd like to replace both of the original 30amp relays that it came with. Pardon my ignorance on relay types and configurations. These are the type of relays I have now, part # JQX 30F ... autifyAB=0

I'm wondering if this higher current model in the link below is the same type/configuration as the one in the link above? ... Sw9NdXtHLj

Re: Replacement Relays for ESC 24v - help *UPDATED LINK*

PostPosted:Sat May 26, 2018 2:00 am
by TinCanTomCat
The second link will be fine (assuming your driving them at 12v or limiting the current).

The first link, if the same spec as your current ones, aren't fully suitable anyway - switching DC on AC spec contacts (and visaversa) tends to cause them to burn up.