Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
for smaller 6v vehicles that NEED to be upgraded to 12v.
By Static
#132706
Ok...I bought a fatback chopper a few weeks ago with the hopes of fixing it for my daughter. It came with no battery and no charger.

I already know the opinion on a lawnmower battery, so I went with a sealed motorcycle battery. Got it for 35 bucks at wal-mart due to their stocking placement.

Anyway...I spent 2 weeks tearing it down to repaint. Got it all painted and cleared. I installed the battery yesterday. Hooked the wires up to the battery with a 30amp inline fuse. Pushed the button...nothing.

Now.. I have completely torn this bike down to the frame. I'm getting 10+ volts to the connectors on the board and 5+ volts to various outs on the 8 pin plug. I can hook a jumper wire from positive screw on board to both motors and get them to activate.
However...I still have nothing when pushing the throttle button. No go...no sounds.

I need help....please.

Thanks in advance,
Static
Attachments
FB_IMG_1433691062162.jpg

$50.01! :lol: J/K I think Toycrusher was jokingl[…]

Awesome. Thanks for the chart, that's helpful. Yes[…]

Burning up Banebot 775 Motors

I managed to smoke one of my Banebots in the Hurri[…]

First gen Bigfoot project

Set screw collars from hardware store to hold whee[…]

HobbyMasters Udemy Course