Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
for smaller 6v vehicles that NEED to be upgraded to 12v.
By xtreme6669
#137824
I was given a 6v motorcycle that had a bad battery. I removed the stock faulty battery and installed a 12V 12ah sealed battery in its place. The motorcycle works fine but if the kids ride it for more than a minute it will shut off, or if they try to go over carpet or up an incline it will shut off. after a bit it switched back on and works again.

There is a fuse off the positive batt lead that is fine but There is a small circuit board under the plastic "gas tank" that i believe must have some type of overload circuit..?

Is there a way I can bypass this function?

Thanks, Nick
Attachments
IMG_1290.JPG
IMG_1290.JPG (39.52 KiB) Viewed 1051 times
IMG_1287.JPG
IMG_1287.JPG (42.7 KiB) Viewed 1051 times
IMG_1286.JPG
IMG_1286.JPG (30.8 KiB) Viewed 1051 times
IMG_1289.JPG
IMG_1289.JPG (28.95 KiB) Viewed 1051 times
IMG_1288.JPG
IMG_1288.JPG (33.5 KiB) Viewed 1051 times


I got a Peg Perego RzR 900 12V used from a co-work[…]

battery problems

Hello everyone, I have a question about the batte[…]

https://www.manualslib.com/manual/758928/Kidtrax-[…]

Usually, USUALLY two motors/gearboxes is a good in[…]

HobbyMasters Udemy Course