Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
for smaller 6v vehicles that NEED to be upgraded to 12v.
By xtreme6669
#137824
I was given a 6v motorcycle that had a bad battery. I removed the stock faulty battery and installed a 12V 12ah sealed battery in its place. The motorcycle works fine but if the kids ride it for more than a minute it will shut off, or if they try to go over carpet or up an incline it will shut off. after a bit it switched back on and works again.

There is a fuse off the positive batt lead that is fine but There is a small circuit board under the plastic "gas tank" that i believe must have some type of overload circuit..?

Is there a way I can bypass this function?

Thanks, Nick
Attachments
IMG_1290.JPG
IMG_1290.JPG (39.52 KiB) Viewed 358 times
IMG_1287.JPG
IMG_1287.JPG (42.7 KiB) Viewed 358 times
IMG_1286.JPG
IMG_1286.JPG (30.8 KiB) Viewed 358 times
IMG_1289.JPG
IMG_1289.JPG (28.95 KiB) Viewed 358 times
IMG_1288.JPG
IMG_1288.JPG (33.5 KiB) Viewed 358 times

Just got a pair of the banebot 775 18v version yes[…]

Motor stock 12v

Two things: (A) I don't see an integrated cooling […]

I'll have to get back to you on the minimum shaft […]

At 16.8 volts I'd just go with the 550s. They'll […]

HobbyMasters Udemy Course