Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
vehicles with a circuit board controlling the motors
User avatar
By Cerberus
#147075
hey guys this is all new to powerwheel upgrading but here we go.
got bmw i8 concept 6v single motor
added decals underglow, didnt like speed so up the power to 12v perego battier.
then i bought a second gear box and added 2 traxxis 550 motors in parrell
using 12v perego battery and 6v stock battery in series.
car goes for few seconds then lights dime and car stops till i pop out battery and plug it back in.
i also removed the 30 amp breaker since it was popping none stopso upgraded to a 40amp fuse.
im thinking its the circuit board but not sure. any feed back would be awsome.
Image this is circuit board i have
Image her ride
User avatar
By Masterjosh
#147631
If the 6v bat is stock it may have a built in fuse/cb I would try to run the car just of the new 12 v bat an see if you have similar issues

MHO, this particular setup isn't likely a good fit[…]

I am upgrading a Best Choice 12v Jeep purchased fr[…]

mine has a chrome housing with clear lens covers..[…]

Hammer! Wow.... Great info... Thank you Reading […]

HobbyMasters Udemy Course