Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
vehicles with a circuit board controlling the motors
By Bigbunny289
#70126
Trying to figure out what i'm doing wrong. The blue power wheels battery i had was dead so i wanted to swap it for a red 6v . The plugs were different so i cut the plug off of the blue battery so the connections would match. This only produced a slow amount of movement in the car. I then wired the battery directly to the wiring for the car and same result. What am i doing wrong?
4wheeler won’t run

I bought a Peg Perego 4wheeler from a friend. They[…]

Here are some of the lubricants mentioned on the f[…]

Dune racer batman 24 volt help

I have a 24v Duneracer with the Eastcoastpowerup E[…]

Another option to consider for the future -- if yo[…]

HobbyMasters Udemy Course