- Sun Apr 24, 2016 11:18 pm
Not sure I'm reading that drawing correctly, but I really don't see a relay trigger?
86=switch positive from your "go" button!
87=gas pedal red
You will want the batteries in series, but I believe you need a resistor since your primary voltage is desired to be 6 volt, but you may need the 12 volt to activate the relay (unless you have a 6 volt relay?)?
The resistor would be to cut the 12 down to 6 to the gas pedal, but I have NO clue what value you'd need. Also, you may want to consider some way to require the gas pedal needing to be down, before your turbo button will activate, like some of the Harley's have. I dunno if they are the new or old ones, but it's NOT the 2 switch, 4 button ones! I'll see if I can dig up a model number, but I can't EVER get a picture to post here, so there's no way to show you if I did find a schematic. =/ sorry but maybe a model will help? I personally have no clue how the things wired, only know hitting the 2nd gear button alone, does nothing, which may be kinder for your little one.
Plus the orange gas pedal wire, I believe shorts to ground, so when the motors aren't powered, they "presumably" become generators to stop the vehicle. So that blue wire you have, pedal to r to motor doesn't look right?