[121Gigawatts]

Hey everyone,

I'm totally new to PW and i was able to find a lambo on craigslist. after taking it home, I found out that it was actually a barbie lambo which has a super6. I've been reading some threads on here to get some ideas.

i read about this "turbo button" and i thought it would be cool to run that on a toggle switch. I went to the electronic store and presented the 6v + 6v or the 12v with some sort of governor.

they recommended the 12v with a pair of resistors... it was a pretty simple circuit to put together (i only have 8th grade electronics to back me up) but i was able to connect everything. My toggle for 12v full works fine but when i try to switch down to 6v (through resistors) I get no power to engines.. my circuit tester reads that connections are fine. (what size resistor do i need to effectively lower the 12v down to approx 6v while still getting power to the wheels?)

also, in my final test i blew 30 amp fuse... (luckily i have backup)

i see the other thread with lower power reverse and that looks really complicated to me hahah...

[CJB]

Honestly, with the super 6, I'd leave it at 12v. They're way more fun.

If you're deadset on having a turbo, you could to a 6v bump (to 18v) on that but you'd really want to limit the duration the turbo is on with the super 6 motors.