Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
for 12v vehicles that NEED to be upgraded to 18v
By justsauer
#138449
I've read some have up graded the KFX to 18 volts without an issue to relay circuit board, while others have damaged the circuit board. I just wanted to let others know that I have found an 18 V replacement relay for the 12v relays that are on the circuit that often fail when 18v is applied. It is an identical relay except it is rated to 18v rather than 12v. Here's a link to the best place I've found to purchase the relays. I've installed them on my sons KFX and haven't had an issue.

http://www.mouser.com/ProductDetail/Pan ... 7JjH%252be


Fall Fun..

The boys have cooled a bit on the power wheels, bu[…]

Very cool! How far do the side rails (mounted to[…]

Peg Perego Gator

First time posting, so I hope I'm doing this right[…]

Help. 6 volt not enough.

Ebay has them. HF3FF/012-1ZST, I bought 2. Will […]

HobbyMasters Udemy Course