Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
for 12v vehicles that NEED to be upgraded to 18v
#147913
Hello,
I am hoping to upgrade my son's John Deere Gator from 12v to 18v for a Christmas surprise. I am in need of some very basic help (I apologise for my complete lack of knowledge). I have read lots of topics but I'm still none the wiser. What do I need to buy? A 6v battery with charger? Will the new battery fit inside the existing battery case? What else is needed?
Thanks so much, Clare
#147914
You'll need a 12v battery and a 6v battery of matching AH ratings (i.e. 12V 12AH, 6V 12AH), and at least 1 30A fuse holder and fuse. I like to fuse each battery, but you can get by with fusing the + side of the 12V. Personally, I'd move the batteries to the space under the dump bed and install a charge port for easy recharging.

Also, may I recommend an 18V Interface board to simplify your wiring...
https://www.freewebstore.org/cjbperformance/18v_Interface_Board/p4125412_16292867.aspx

You'll also need a charger capable of 6v and 12v. Most of us use these:


There are many threads on this forum relating to this topic. Dig around and let us know if you have any other questions.
Dune racer build up help

Yes the pedal still needs the ESC. The pedal prov[…]

The second link will be fine (assuming your drivin[…]

"Best" Choice JEEP

I would look for a self re-setting breaker somewhe[…]

i am curious, can’t seem to find this anywhere. bu[…]

HobbyMasters Udemy Course