Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
Swapping wheels? Adding suspension? Adding traction mods? This is the place for anything between the body and the ground!
User avatar
By MustangGTFanatic
#145510
Hi I'm new here and was doing a project for my step daughter repainting a 12v lightning mcqueen and was curious do the wheels like the rim center part in the middle of the tire is that universal and will go on any of the tires? Also would different tires fit on the car such as tires from a jeep power wheels?
#145514
Jeep wheels will probably require a fair amount of trimming. Mustang wheels may fit? The center axle on most is the same 7/16 bar, so for that, any should fit. But axle length and wheel width does vary, Harley's and a few others have some good shims and spacers, but I'm not sure how much you can fit in the McQueen you have, and still steer? Is yours 6 or 12 volts?
HELLO!

THANK YOU FOR THE ADD! LOOKING TO BE ABLE TO ASK A[…]

Unibody Jeep Front End Sag

I did this on my Hurricane. I used a fairly long M[…]

I will have to look at the shifter when I get off […]

Upgrade BMW i8 Concept

If the 6v bat is stock it may have a built in fuse[…]

HobbyMasters Udemy Course