Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
Need new motors? Grind a gearbox? Adding teeth to a pinion?
#148949
EDIT: I found this post (viewtopic.php?t=17669) which should answer all my questions.

I have seen quite a few mods where people replace the stock plastic tires with rubber (lawn mower or otherwise). However, I don't see any example of how they adapted the gearbox to the new tires. I'm sure I could come up with a creative way of doing it, but there is probably a "right" way and I'd prefer that.

Can anyone point me in the right direction? I'm sure examples have been posted. I just haven't come across them. FYI... I have a lot of tools, but I don't have a welder.

Dune Racer: https://amzn.to/2KbCqfi
Gearbox: http://www.mltoys.com/product-p/stage-i-quad.htm
Front Tires: https://amzn.to/2G3ZMRt
Rear Tires: https://amzn.to/2Ic8C1B

Tires were just suggestions by other modders, so other tires would work too.

I just bought better motors and plan on upping the voltage to 18v. We have thick (St. Augustine) grass in our back yard which is mostly where the kids ride. My motivation for doing this is because we need a little more get-up-and-go and traction.

Thanks
Dune racer build up help

I agree on using an ESC instead of the drill trigg[…]

i am curious, can’t seem to find this anywhere. bu[…]

"Best" Choice JEEP

Chances of both motors failing are slim. Can you r[…]

Sounds like the relay coil may have failed. Make s[…]

HobbyMasters Udemy Course