Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
I have something you MIGHT want. Do you want to buy?
#145713
miravete wrote:I've been searching and searching and searching and no luck. I took off the accelerator/actuator pedal switch from my son's mini cooper and now I don't know the order of the wires.

Would you be able to send me a pic of the wiring as to which wire goes where and to where....?

Image

it's 4 wires, 2 greens and 2 yellows.


I'm not sure that's the same vehicle......the background in your pic looks like its a different set up. I will take a peek tonight and see.
#145714
bndawgs wrote:
taz11 wrote:Pentagon or cross driver?


They look similar to these.

Image

shipping to 20105. Depending if you have any, i could use a few other parts as well. windshield, back gate for the dumper.


They look the same from the outside. You need to check the driver between the wheel and the gearbox. If it is a "+", I have them. If it is pentagon shaped I do not. I believe I have a tailgate and a windshield. I have lots of stuff already off in the shed.
#145733
miravete wrote:I've been searching and searching and searching and no luck. I took off the accelerator/actuator pedal switch from my son's mini cooper and now I don't know the order of the wires.

Would you be able to send me a pic of the wiring as to which wire goes where and to where....?

Image

it's 4 wires, 2 greens and 2 yellows.



I checked last night. Mine is a 12v two seater, its a different car.
#145742
tpirovol wrote:You wouldn't happen to have gearboxs and motors for an escalade would you?

Appreciate any help
Thanks T


I'd rather not part the escalade at this point. I have some 16T #7 out of a lifted jeep that are the same ratio. $27 shipped to the east coast, $32 shipped for the rest of the lower 48. (for the set of 2)
#145758
tpirovol wrote:Sorry new to this would that be compatible with the Escalade? Also would you ship to Canada?

Thank you for your help
Terry


Yes, they will fit an Escalade
I used to ship to Canada....it is a PITA. If you are not in a rush I could do that. The shipping would most likely be more.
#145867
racer0018 wrote:I got a 19t Barbie Jeep and need some new gear boxes for it. I don't need the motors just the gear boxes. Do you have some and if so how much. Thanks and let me know.



#7 or 7R? I have a set of #7 with seized motors. $15 plus shipping for the set. Whats your zip for shipping?
#145875
racer0018 wrote:They are just the 7s. My zip is 50536. Thanks and let me know. I don't need the motors so you can take those out to save on shipping. Thanks.



$27 shipped, still in the jeep so please allow an extra day or two for removal.
#145888
taz11 wrote:
racer0018 wrote:They are just the 7s. My zip is 50536. Thanks and let me know. I don't need the motors so you can take those out to save on shipping. Thanks.



$27 shipped, still in the jeep so please allow an extra day or two for removal.



Also if it works better for you I can send you a label for shipping for them. I got accounts with USPS and also with ups and FedEx. Just let me know an email Abby to send them to and I'll send you the shipping label when your ready for them. Also need the box specs and I'll get that taken care of it. Sorry I got a 4 year old bugging me all the time about getting it going, like her gator isn't good enough for her. Thanks.
#145890
That works too..... I'm on the road until Monday, then I'm off for the week. I'll get them ready as soon as I can.
#145906
taz11 wrote:
bndawgs wrote:
taz11 wrote:Pentagon or cross driver?


They look similar to these.

Image

shipping to 20105. Depending if you have any, i could use a few other parts as well. windshield, back gate for the dumper.


They look the same from the outside. You need to check the driver between the wheel and the gearbox. If it is a "+", I have them. If it is pentagon shaped I do not. I believe I have a tailgate and a windshield. I have lots of stuff already off in the shed.


I finally remembered to look. they are the "+".

also what type of gearbox does these gators use?
#145907
racer0018....sent you an email....ready to go.

bndawgs.....I have several of those gearboxes. Let me know how many you want. I will check on the other items
#146198
I'm out of 3As at the moment. Sorry.
#146316
Bigfoot97 wrote:Have any 1994 big foot parts? need 1 center white/hubcap, 2 bars for roll bar. full wiring harness if possible. KC lights. Let me know. appreciate the help. Thanks



Alfred Sloan (dapoet) bought all my bigfoot stuff. I should have the hubcap. They where used on many different models.
#146353
Yes I do. Another member contacted me about them yesterday but I have not heard back. I'd say give them a day or to and then they are yours.
#146361
John Deere tractor added to the first post list today.
#146389
12v KFX and Lil Jeep added to first post today.
#146391
Still waiting on a reply. If I don't hear by tomorrow mid-day they are yours. Whats your Zip? I'll get a total worked up.
#146410
$5 first class shipping ($17 tl). $8 priority shipping($20 tl) It looks like they get there on about the same day.


I will PM paypal info shortly
#146435
No, sorry, those are hard to find used.
#146455
Sorry, I was away for a race weekend. Yes they are available. I am available evenings this week. I will PM you my cell # to set up a time.
#146499
Jammin Jeep and lifted Fire Rescue added.
#146874
Taz,

I am looking for a full steering linkage for the blue f150. Do you have one or do you know how to fix one? I have one wheel that points in a different direction when the other is straight... I have fixed my Jeep issues but this one is different as everything is darn plastic!
#147025
WyldRyd wrote:Taz,

I am looking for a full steering linkage for the blue f150. Do you have one or do you know how to fix one? I have one wheel that points in a different direction when the other is straight... I have fixed my Jeep issues but this one is different as everything is darn plastic!



Sorry, I've been off the site for a bit. I sold the only F150 I had. If it where mine I would make up a second metal tie rod to correct the toe. Bolt it between the plastic nubs that the plastic one snaps onto. Leave the plastic one in place to connect the steering shaft. You can also use the "adjustable turn buckle" technique in the FAQ section used on many jeeps to fix the overall sag. http://forum.modifiedpowerwheels.com/viewtopic.php?f=44&t=2021
#147034
twisterdude1009 wrote:How good are the tires on the Fire Rescue Jeep?


They are pretty good. If my memory serves me right, about an 8 out of 10
#147108
11 working vehicles and a few chargers on CL now $150. Vehicles pictured plus the Beach Ranger and Lil Enforcer Jr. The ones with "issues" have been repaired. If you don't want the chargers I will knock off a few $$.

https://cnj.craigslist.org/bab/d/power- ... 81675.html


UPDATE...Down to 8..$100
#147236
Superbaseball25 wrote:Hello sir!
I have an old style Gator I just bought that needs a couple parts. Do you have the driver side gearbox available? Would you ship to Alabama? Thanks!



Yes, I have a gearbox, windshield, and I think a battery cover (need to check on condition) . Do you need the brush guard that goes on the cover? Not a lot of time right now for shipping, might take a few days.

Cross driver or pentagon driver on the gearbox?

$50.01! :lol: J/K I think Toycrusher was jokingl[…]

Awesome. Thanks for the chart, that's helpful. Yes[…]

Burning up Banebot 775 Motors

I managed to smoke one of my Banebots in the Hurri[…]

First gen Bigfoot project

Set screw collars from hardware store to hold whee[…]

HobbyMasters Udemy Course