Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
Need new motors? Grind a gearbox? Adding teeth to a pinion?
User avatar
By Rshep
#148740
Ok guys just as a recap since it was so long ago I have a Rastar Bentley GT convertible that only goes in reverse. The shifter switch has 3 positions hi, lo, and reverse.

When the shifter is in forward I can hear the motors making a high pitch buzzing sound trying to spin but get no movement from the car.

I have taken the dish and the shifter apart and all the connections seem clean and I even put dielectric grease on the ones I could by the battery and the motors.

My first thought was the shifter was bad but the car is also r/c and when I put it in r/c mode so the switch doesn’t mover or matter where it is the car still only goes in reverse.

I have verified the motors are getting power in reverse as well as in forward mode.

Any ideas?


User avatar
By Rshep
#148748
So I purchased two new motors thinking it had to be a motor problem. The new motors still only go in reverse. I’m stumped. If I’m getting 12v to the motors in reverse as well as forward idk how I only have reverse
Peg Perego Gator

First time posting, so I hope I'm doing this right[…]

Help. 6 volt not enough.

Ebay has them. HF3FF/012-1ZST, I bought 2. Will […]

I have started the conversion process, added a sec[…]

Gaucho Grande gearboxes

I have a faded old Yellow Gaucho Grande I have bee[…]

HobbyMasters Udemy Course