Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
Swapping wheels? Adding suspension? Adding traction mods? This is the place for anything between the body and the ground!
User avatar
By Lele
#148892
Hi all,

as i described in the subject i am here to ask you how to remove wheels because after removing the ferrari logo caps in the center of the wheel there isn'n any tipe of screws and trying to pull the rounded head rivet seems to be difficult and dangerous for the wheel itself (as you can see in attached images the bearing is visibile under the rivet)...

Image

So what's to do?

I really appreciate any help...

Emanuele


User avatar
By wired
#148895
What is the manufacturer/brand name? It is probably a pushnut. The manufacturers website may have a parts list. Pushnuts are not made to be re-used and often get destroyed when trying to remove. There is a removal tool available but a little patience and a large set of slip joint pliers will do the trick.
User avatar
By Lele
#148928
I've checked the manufacturer website but there is no evidence of complete part list..
So i wanna ask you if is possible to renew the steel bar with threading it at the end to screw with an exagonal (normal) nut...

Ok, just checked troubleshooting and I think the s[…]

didn't get any answer here , so far looks like the[…]

I may have one in the dream dazzler project I plan[…]

I am glad to read that you come up with outstandin[…]

HobbyMasters Udemy Course