Receiver Hitch With Truck Pulling Hitch On GMC Denali

Reply

Receiver Hitch With Truck Pulling Hitch On GMC Denali#149893

By Andrew45 - Sun Sep 30, 2018 2:02 pm

- Sun Sep 30, 2018 2:02 pm #149893

This is the receiver hitch and hitch I made for my son’s GMC Denali. This is an adjustable hitch for the Power Wheels Truck Pulling. They just started doing this around my area. My son got 1st place in the first pull they had.

Attachments

E0B2E2F3-A513-48FC-8AFE-D88C3E255E15.jpeg (49.79 KiB) Viewed 353 times

F95D8C0C-E75F-4D7C-8A22-0D66C39203ED.jpeg (53.82 KiB) Viewed 353 times

11FBF05D-B86A-4A76-B2B6-180AF3E52C03.jpeg (1.36 MiB) Viewed 353 times

Re: Receiver Hitch With Truck Pulling Hitch On GMC Denali#149899

By DuneEngines.com - Mon Oct 01, 2018 1:20 pm

- Mon Oct 01, 2018 1:20 pm #149899

What's your area? I thought that was a full sized pick-up on first glance. Paul...

Re: Receiver Hitch With Truck Pulling Hitch On GMC Denali#149903

By Andrew45 - Tue Oct 02, 2018 11:16 am

- Tue Oct 02, 2018 11:16 am #149903

New Haven Missouri. About 75 miles west of St Louis Missouri.

Reply

Page 1 of 1
3 posts

Receiver Hitch With Truck Pulling Hitch On GMC Denali

Receiver Hitch With Truck Pulling Hitch On GMC Denali#149893

Attachments

Re: Receiver Hitch With Truck Pulling Hitch On GMC Denali#149899

Re: Receiver Hitch With Truck Pulling Hitch On GMC Denali#149903

Install Titan 775 motors into 7R gearboxes.

Arduino controlled Brushless w/ ESC (lightning mcqueen)

24v w Traxxas 775s, Circuit Trips In High Gear

4WD Four Wheel Drive : Which model makes the easiest conversion with extra electric motors etc.