Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
I want something you MIGHT have. Willing to sell?
#150566
One of my motors went bad so I am looking for (2) 19t motors for this car. I have a bunch of Jeep Hurricane parts, pretty much a complete car with Gearboxes etc if someone is looking to trade.

What I am looking for is something comparable to this, without the big price tag.

Thanks in advance
Attachments
90258642-5C8A-426E-A35A-3E983C445AD8.png
90258642-5C8A-426E-A35A-3E983C445AD8.png (559.89 KiB) Viewed 604 times


#150571
$90?!?! :o

The ones you posted are 775 motors. They are bigger than the stock motors. If you just want something to replace your burnt motors then I would just get some from eBay. $10-20 max.
I’ll get you a link to the ones I just bought for my sons lightning mcqueen in a minute. It was one of the motors recommended in one of the threads on here.

This is the one I just installed. All you need is the correct pinion gear and everything should bolt right up.

https://rover.ebay.com/rover/0/0/0?mpre ... 2267761821
#150573
Ok so I looked at the motor and I can figure out wiring it up after all. Still not sure tho what pinion gear to get and how to get it to stay on.

Attached is a copy of my gearbox... Is this a 7r?
05AED804-0BC7-4BB2-835E-91AFFAE6DCCB.jpeg
05AED804-0BC7-4BB2-835E-91AFFAE6DCCB.jpeg (2.8 MiB) Viewed 577 times
4178CD15-A301-4C24-B1A0-0777B15C1062.jpeg
4178CD15-A301-4C24-B1A0-0777B15C1062.jpeg (2.82 MiB) Viewed 577 times
#150574
Look like you have the #7 gearbox with the 19t pinion gear. If you look closely next to where the motor mount to you can see the number 19. You will need a 32p 19t pinion gear with a 3mm bore. I’ll link you to the pinion gear you need if you get the motor above.


https://rover.ebay.com/rover/0/0/0?mpre ... 2694161980

These pinion gear have a set screw so you will slide the pinion gear over the shaft and tighten the screw down. Use a little bit of loctite. Oh and also file a flat spot on the shaft so the set screw have something to grab onto.

ive also been trying to find pieces for this littl[…]

Our 18v Conversion is the simplest speed upgrade w[…]

Hi guys, I have replaced motors and bought new bat[…]

A. 1 bone stock Gaucho Rock in complete with worki[…]

HobbyMasters Udemy Course