Gruber
HobbyMasters
M.L. Toys
KidsWheels
Gruber
HobbyMasters
M.L. Toys
KidsWheels
HobbyMasters M.L. Toys
Gruber
KidsWheels
Electronic Scooter Controllers have become a popular addition to our vehicles. Ask specific questions about ESCs here!

***WARNING*** this section is for ADVANCED MODDERS. if you try anything in this section you NEED to expect minor issues with the build up to and including complete FAILURE of EVERYTHING in your freshly built BPRO.

Have fun ;-) :-)
User avatar
By TNetrider
#151015
I just replaced the foot pedal switch with a drill trigger switch on three of my kids powerwheels. Works great. the only tricky part was physically fitting the switch in the foot pedal assembly. A few holes and some cable ties did the trick. The switch provides soft start and autobraking when pedal is released.
TNetrider wrote: Sat Aug 12, 2017 6:44 pm If anyone is interested, this is the drill switch I used...

http://www.ebay.com/itm/16A-7-2-24V-Ele ... 2749.l2649
User avatar
By thisdave
#151016
Do you have any pictures of your drill switch in place?
Are you running 24VDC ?
Do you just cut off the LED? and is that a fuse holder?

ive also been trying to find pieces for this littl[…]

Our 18v Conversion is the simplest speed upgrade w[…]

Hi guys, I have replaced motors and bought new bat[…]

A. 1 bone stock Gaucho Rock in complete with worki[…]

HobbyMasters Udemy Course