M.L. Toys
M.L. Toys
HobbyMasters M.L. Toys
Electrical, Battery & Switch help
This conversion is specificly for dual 6volt (12volt) systems that utilize a single wire plug for the high speed lockout. The plug lockout system was used on most dual 6volt Power Wheels with push button shifting.

By simply unplugging the lockout plug, you now have a perfect location to connect another 6 volt battery. This will provide 18 volts in high and 6 volts in low.

Here is a diagram that should help explain it. (wire colors may vary)
dual 6 to 18volt mod.jpg
dual 6 to 18volt mod.jpg (40.75 KiB) Viewed 8895 times
It is very important that you follow the diagram exactly since the connections are polarity sensitive.

Here is the finished product.
_18v bigfoot hookup.jpg
_18v bigfoot hookup.jpg (45.83 KiB) Viewed 8895 times

Check out the original thread here: ... C_ID=18865

Another note: Some older models with #3 gearboxes had plastic pinions. Plastic pinions will not hold up at 18volts. They should be switched to metal ones -OR- refer to "#3 plastic pinion fix" here: viewtopic.php?f=41&t=607
Last edited by taz11 on Tue Dec 06, 2011 1:01 pm, edited 5 times in total.

cadis12 wrote:Can I still do this trick with the dual 6volt to 12volt wire harness mod?

No.....once the harness is "flipped" to use a single 12 volt, you can add the extra six volt inline at the main battery connector.

Sounds awesome! I just ordered everything to male[…]

Volts/ current regulator

Hi all, I’m new I have a lightning McQueen[…]

Peg Perego axle diameter

The axle rod is 7/16. I just replaced one with a t[…]

Just converted a Peg Perego Gator and tractor to u[…]

HobbyMasters Udemy Course